HellVape & Heathen Dead Rabbit RDA // 24mm
$49.00 $10.00You save 80%!
The Hellvape Dead Rabbit 24mm RDA touches down in NZ featuring a 4 post design with 4 vertical 2.5mm terminals making it similar to a postless deck RDA. What sets this one apart from your average post-less build deck is the raised platform which makes it easy to insert coils and snip the leads from below. A PEEK insulated block for the best heat resistance, knurled cap to provide better grip when switching air flows to accommodate single or dual coil builds. When you add all that with a nice deep juice well, you’ll find that this atomiser was built to last and supremely made with the advanced vaper in mind.
The airflow on this RDA is above where the coils will be placed while utilising a diagonal airflow design through the top cap that directs air flow right under your coils for maximum flavour. The airflow slots are 10mm wide and 2.5mm high, creating a lot of airflow for maximum vapour production. Teaming this feature with the included 10mm wide bore drip makes for a non-restricted pull for perfect clouds and a smooth vape.
The Hellvape and Heathen team made this RDA usable by all types of vapers by including a squonk pin, allowing you to add this to your favorite squonk mod for vapers who find constant dripping a hassle. For those not about that squonk life, the Dead Rabbit RDA has a 5mm juice well and a high-positioned airflow for reduced leaking, so no need to worry about over-dripping on this RDA.
Conductivity is important and this RDA doesn’t skimp on the details. With a gold-plated positive post and a stainless steel negative post, combined with the gold-plated 510 pin that protrudes, this RDA made the science of building aesthetically pleasant as well.
Hellvape & Heathen have made an impressive & user-friendly RDA that any dripper can enjoy.
Check out the Vandy Vape Pulse BF Squonk Mod here: Pulse BF Squonk Mod
- 24mm rda with ample build space and generous post holes
- Slide in top coil deck takes the guesswork out of pre cutting your coil leads
- Adjustable top side diagonal airflow with a focus on flavor and to minimize leaking
- Single or dual coil configurations
- 304 grade stainless steel
- 5ml eliquid well
- Secured by Double O-Rings
- Gold plated, PEEK insulated positive post for better conductivity
- Knurled grip to adjust the airflow with ease
- Post screws fasten to the flat side of the coil lead to preserve your build
- Bottom feeding pin included for squonking
- Two 810 driptip options including a resin tip and a 510 adapter
- Slotted or hex head post screw options
- Protruding 510 pin and peek insulation for hybrid top cap compatibility
In The Box
1x Dead Rabbit 24mm RDA
2x 810 Resin Drip Tips (10mm Bore)
1x 510 Adapter
1x Gold Bottom Feed Pin
4x Hex Screws
2x Hex Screwdrivers
Sadly this RDA looks nothing like the pictures. Bought the red one to go with some of the red mods I have, I even held the mods to the screen to see if they looked good & matched. But in real life it's more of a real dull red, like a really badly sun faded car. It matches nothing so will never be used. It doesn't even have the same drip tip pictured. What a waste of money.